KT - Box Comp Housing

HOME | LEAD TIME | TERMS | CONTACT | BUYER'S GUIDE

Box Compensator Housing Mod

With this Mod (Modification), we can modify your holster to allow for a muzzle attached Compensator, if you have a compatible Compensator. The requirements are listed below. The box compensator house will be built slightly oversized for heat dissipation and to prevent holster damage.

Requirements:

1. The compensator has to be the same profile or narrower than your slide.

2. The compensator can’t have overhangs that exceed your slide’s narrowest parts to prevent anchoring in the holster.

3. The compensator has to be less than 2” from your slide’s front face. If your compensator is 2” or longer, we can still build the holster with this mod but with an open muzzle. The open muzzle will allow the compensator’s extra length to pass through.

Other compensator options:

a. Rail attached compensators

If you have a rail attached compensator, we might still be able to build the holster with this Mod, as long as your compensator does not exceed your slide’s profile. You will have to send us your compensator for the holster build.

Before placing an order with the Box Compensator Mod, please email us 2 pictures of your handgun setup with your Compensator attached. We’ll check for compatibility.

contactktmech@gmail.com

b. Large/Oversized compensators

If your compensator is too large and not compatible with this Mod, we have the KT AKELA Custom S holster that might work for you. The KT AKELA Custom S holster is specifically designed for use with a Suppressor or Large Compensator attached. →

HOME

FACEBOOK - New Product Updates

LEAD TIME

TERMS