HK P30SK 7006 |
 |
Contact us if your handgun doesn't match this sample image, such as a different slide or frame, trigger guard shape, etc. contactktmech@gmail.com
If you'd like us to check your handgun for compatibility when you send us an email, please attach a picture of the (1) left and (1) right sides of your handgun (on a flat surface). You're welcome to tape over serial numbers. We'll see what we can do. |
|
|
|
|
TACTICAL HOLSTERS |
CONCEALMENT HOLSTERS |
| KT Universal Bolt Pattern
High Sights 0.5in Clearance
*Level 2 retention holsters - If your pistol has a "hammer," the hood's default position is with your hammer down or halfcocked. Add a comment if you plan to carry with the hammer cocked-n-locked.
**Belt Attachment not included and are sold separately.
|
Low Profile Holster
High Sights 0.5in Clearance
*Belt Attachment Included with any Concealment Holsters |
|
|
|
|
Custom Modifications (Mods): |
|
|
|
|
|
Add a Fabric Wrap: |
|
| * This custom option adds a fabric wrap to your new holster. *The base Thermoplastic color will vary with this wrap option. The fabric wrap will be bonded to the holster during production and can’t be added to an existing holster. This fabric wrap option is only available for new holster builds. Holsters sold separately. |
|
|
|
|
Add a Microfiber Suede Liner: |
Change the Base Holster Color/Pattern: |
|
| * The internal Microfiber Suede Liner is great for minimizing wear on your handgun’s finish. Just be aware that if your slide has very aggressive serrations, i.e. Walther PDP, the serrations act like a cheese grater and will eat away at the liner. Best to skip this option if you have cheese grater serrations. |
|
|
|
|
Parts (for TACTICAL HOLSTERS only): |
Parts (for KT Gunfighter Classic Holster only): |
|
| * Not compatible with Concealment Holsters |
* Quick Clamp standard fits up to 0.13" thick belts
* Quick Clamp duty fits up to 0.25" thick belts |
* Since a lot of customers swap out parts and customize their holsters, we don't use thread lockers (Blue Loctite) on the belt attachment fasteners (Screws) for your convenience. Once you find your preferred setup, we recommend adding a very small dot of blue non-permanent thread lockers to the screws, such as Blue Loctite or equivalent. This prevents the screws from backing out. You can find the thread locker at any hardware store or Amazon here:
 https://amzn.to/4rPG2Z6
|
|
* Not compatible with Tactical Holsters
* Not compatible with the KT Gunfighter CC (Company Carry) holster. |
* Since a lot of customers swap out parts and customize their holsters, we don't use thread lockers (Blue Loctite) on the belt attachment fasteners (Screws) for your convenience. Once you find your preferred setup, we recommend adding a very small dot of blue non-permanent thread lockers to the screws, such as Blue Loctite or equivalent. This prevents the screws from backing out. You can find the thread locker at any hardware store or Amazon here:
https://amzn.to/4rPG2Z6 |
|
|
|
Magpouch: |
|
| * Magpouch FREE color match. When you order a magpouch with your new holster order, we will color match or fabric wrap match your magpouch to your new holster at no extra charge. The default color without a holster is Black KYDEX (Thermoplastic). |
|
|
|
|
| |
|
| |
|
|
|
