Shadow Systems MR920/XR920 1200 |
 |
Contact us if your handgun doesn't match this sample image, such as a different slide or frame, trigger guard shape, etc. contactktmech@gmail.com
If you'd like us to check your handgun for compatibility when you send us an email, please attach a picture of the (1) left and (1) right sides of your handgun (on a flat surface). You're welcome to tape over serial numbers. We'll see what we can do. |
|
|
TACTICAL HOLSTERS |
CONCEALMENT HOLSTERS |
| KT Universal Bolt Pattern
High Sights 0.5in Clearance
 Level 2 retention holsters - If your pistol has a "hammer," the hood's default position is with your hammer down or halfcocked. Add a comment if you plan to carry with the hammer cocked-n-locked.
**Belt Attachment are sold separately below ↓ |
Low Profile Holster
High Sights 0.5in Clearance
*Belt Attachment Included with any Concealment Holsters |
|
**Belt Attachment are sold separately here ↓
|
|
|
|
Custom Modifications (Mods): |
|
|
|
|
|
Add a Fabric Wrap: |
 |
|
|
NOTICE:
* This custom option adds a fabric wrap to your new holster. *The base Thermoplastic color will vary with this wrap option. The fabric wrap will be bonded to the holster during production and can’t be added to an existing holster. This fabric wrap option is only available for new holster builds. Holsters sold separately.
* The MF Suede wrap is made of a very soft and comfortable Microfiber Suede. Non-reflective and non-abrasive. |
Send In Fabric Wrap Service: This option allows you to send in your own custom fabric or microfiber suede wrap material, and we can apply it to your holster and/or magpouch order.
Requirements for each holster: 2 (two) 12”x12” or 1 (one) 12”x24” of fabric per holster. 1 square will be used to test the material’s characteristics with our manufacturing process. The other 1 square will be used to apply the fabric to your new holster.
You are welcome to send in a 1 yard or more of fabric, and we can store it for you (free) for up to 6 months. This allows you to order more custom wrap holsters or magpouch in the future without having to send in more fabric.
Requirements for each magpouch: The same as the holster.
Shipping: We will provide you with shipping instructions after you place your order. |
|
|
|
|
Add a Microfiber Suede Liner: |
Change the Base Holster Color/Pattern: |
|
| * The internal Microfiber Suede Liner is great for minimizing wear on your handgun’s finish. Just be aware that if your slide has very aggressive serrations, i.e. Walther PDP, the serrations act like a cheese grater and will eat away at the liner. Best to skip this option if you have cheese grater serrations. |
|
|
|
|
Parts (for TACTICAL HOLSTERS only): |
Parts (for KT Gunfighter Classic Holster only): |
|
| * Not compatible with Concealment Holsters |
* Quick Clamp standard fits up to 0.13" thick belts
* Quick Clamp duty fits up to 0.25" thick belts |
 
A lot of customers swap out parts and customize their holsters, we don't use thread lockers (Blue Loctite) on the belt attachment fasteners (Screws) for your convenience. Once you find your preferred setup, we recommend adding a very small dot of blue non-permanent thread lockers to the screws, such as Blue Loctite or equivalent. This prevents the screws from backing out. |
|
* Not compatible with Tactical Holsters
* Not compatible with the KT Gunfighter CC (Company Carry) holster. |
Proper torque is required when installing fasteners (screws). This helps keep the fasteners in place and prevents the screws from coming loose. We recommend using an impact driver. From the factory, we use a Ryobi impact driver because they have the sufficient torque to drive the screws, while not overpowering or stripping the threads. The impact driver also makes it a lot easier to loosen tight screws. When tightening screws, we recommend letting the impact driver click about 2-3 times. |
Phillips bits that are specifically for impact drivers are recommended. They can withstand the torque without chipping or breaking. Of all the brands we’ve tried, Milwaukee bits appear to last longer. This is what we use for all parts assembly. |
|
|
|
Magpouch: |
|
| * Magpouch FREE color match. When you order a magpouch with your new holster order, we will color match or fabric wrap match your magpouch to your new holster at no extra charge. The default color without a holster is Black KYDEX (Thermoplastic). |
|
|
|
|
| |
|
| |
|
|
|
